SUNTHAI GARMENT MANUFACTORY LTD
SUNTHAI GARMENT MANUFACTORY LTD
Add to Cart
Heart Applique Plaid AOP Baby Boy Pram Suit Crew Neck All Over Print Coverall
Specification
|
Product name:
|
Newborn Girl Coverall Heart Applique Plaid AOP Baby Boy Pram Suit Crew Neck All Over Print Coverall |
| Model Number: | Pram20180104-039 |
| Fabrication: | 100% Polyester |
| MOQ: | 500PCS |
| Sample time: | 4-5days |
| Delivery time: | 10-15days |
| Color: | whiteyellowpink, customized |
| Packaging: | 1pcs/Bag 200pcs/Carton |
| Gross weight: | |
| Carton size: | |
| Payment: | T/T,L/C |
| 30% deposit, 70% before shipment |
Baby Pram Suit Construction Details:
| Description | Operation/Workmanship |
| Neckline - BINDING | 3/8" wide rib collarette binding at neckline with 1/8" double needle topstitch - ends are turned under and tacked |
| Closure - Zipper | zipper closure zipper applied along front opening and inseam (left side as worn) - hidden stitch at zipper application (no topstitching is visible on face of garment) - top edge of zipper is caught at neckline binding application - RIB fabric zipper guard inside under zipper |
| tab - self tab | self fabric tab with cap snap at CF neck, clean finished, single needle edgestitched - fused, self fabric backing applied inside garment behind female side of snap for added support |
| Sleeve - Set-in | set-in sleeve, seam is 2 needle 4 thread overedge. |
| Cuff - Self Cuff | Self cuff, clean finished and attached to sleeve w/ 2 needle, 4 thread overedge stitching. |
| Side Seam - Standard - 4 thread | 2 needle, 4 thread overedge, seam allowances pressed towards back body. |
| Inseam - self gusset | self gusset is 2 needle, 4 thread overedge Right and left inseams are serged (2 needle, 4 thread overedge) |
| ankle - elastic | Elastic applied across back ankle from inseam to outseam, 1 3/4" above foot seam. apply with chain stitching |
| FOOT - self fabric | self fabric sole and toe are applied with 2 needle, 4 thread overedge |
Baby Pram Suit Overall Size For Reference(inch)
| POINT OF MEASURE | 0/3M | 3/6M | 6/12M | 12/18M | 18/24M |
| Total Trunk: from HPS to Fold | 14 1/2 | 15 1/2 | 16 1/2 | 17 3/4 | 19 |
| Chest Width: 1" Below Armhole | 9 1/2 | 10 | 10 1/2 | 11 | 11 1/2 |
| Shoulder Width: Seam to Seam (Set-In) | 7 1/2 | 8 | 8 1/2 | 8 7/8 | 9 1/4 |
| Across Chest: at Mid Armhole (Set-In) | 6 3/4 | 7 1/4 | 7 3/4 | 8 1/8 | 8 1/2 |
| Across Back: at Mid Armhole (Set-In) | 7 1/4 | 7 3/4 | 8 1/4 | 8 5/8 | 9 |
| Armhole Straight: SP to Underarm (Set-In) | 4 1/8 | 4 3/8 | 4 5/8 | 4 7/8 | 5 1/8 |
| Sleeve Length: from CBN to Edge (Long) | 12 | 13 1/4 | 14 1/2 | 16 | 17 1/2 |
| Bicep Width: 1" Below Armhole | 3 1/8 | 3 1/3 | 3 1/2 | 3 2/3 | 3 7/8 |
| Sleeve Opening Width: at Edge (Long) | 1 3/4 | 1 7/8 | 2 | 2 | 2 |
| Cuff Height: Sleeve | 1 | 1 | 1 | 1 | 1 |
| Hip Width: 2" Above Crotch Point | 9 3/4 | 10 1/4 | 10 3/4 | 11 1/4 | 11 3/4 |
| Thigh Width: at Bottom of Gusse | 4 | 4 3/8 | 4 3/4 | 5 | 5 1/4 |
| Inseam Length: Center of gusset to foot seam (Long) | 6 | 7 1/2 | 9 | 10 1/4 | 11 1/2 |
| Ankle Width: 1 3/4" up from foot seam | 2 7/8 | 3 | 3 1/4 | 3 1/2 | 3 5/8 |
| Gusset Length | 3 1/2 | 3 3/4 | 4 | 4 1/4 | 4 1/2 |
| Gusset Width | 2 1/4 | 2 3/8 | 2 1/2 | 2 5/8 | 2 3/4 |
| Foot Length: at Center | 4 1/4 | 4 1/2 | 4 3/4 | 5 | 5 1/4 |
| Foot Width: at Widest | 2 1/4 | 2 3/8 | 2 5/8 | 2 7/8 | 3 |
| Toe Cap Length | 2 1/8 | 2 1/4 | 2 3/8 | 2 1/2 | 2 5/8 |
| Back Neck Width: Edge to Edge | 4 1/8 | 4 1/3 | 4 1/2 | 4 2/3 | 4 7/8 |
Trims and Accessories Inspection Process Followed in Apparel Industry
Trimmings and Accessories Inspection:
Trimmings and accessories inspection is a critical matter in apparel manufacturing
industry. To achieve desired quality apparel or clothing, proper trimmings and
accessories inspection process have to follow. It should be noted here that, the total
process of trims and accessories inspection should be done by experienced quality
inspector. This article has presented the proper method of trims and accessories
inspection with the inspection defect check list for clothing accessories and trimmings.
How to Check Trims and Accessories in Clothing or Apparel Industry?
All the trimmings and accessories inspection should be done on arrival into the apparel
manufacturing factory by lot or shipment. Some buyer use an acceptable quality level
(AQL) of 2.5 to inspect a lot or shipment, but we follow the best method is for to check
each lot or shipment a minimum of 10%. That means, if 10 cartons arrive, then 10% will
be checked from each of the 10 carton e.g. if only 1 size article is found in a carton then
10% of each of the 10 cartons will be inspected. If more than 1 size is found in each
carton then 10% of each size of article found in each of the 10 carton will be checked.
Just checking 1 carton (100%) out of the 10 carton (10%) doesn’t mean that the balance
quantity of pieces in the other 9 cartons is correct. Some special cases QI will be
checked 100%. In this way, trimmings and accessories inspection should be done
in readymade garment or apparel sector.
The following defects or faults are top most critical defects with “ZERO
| Defect Classification | Critical | Major | Minor |
| Incorrect Country of Origin | X | ||
| Fabric Composition | X | ||
| Care instruction / Symbol | X | ||
| Size | X |
Advantage:
1. Your clothes’ styles can be specific customized based on your requirements!
2. Even we can customize printed your own pattern to make your clothes unique in world!
3. Here you will get the most competetive factory price !
4. No matter you place the sample order or mass order, your actual clothes’ pictures will always be sent for approval before shipping out!
5. Any problems regarding the production process will be kept updated to you timely.
6. Meanwhile, the small order is warmly welcomed!
7. We have got the certificate Oeko-tex 100
1. When can I get the quotation ?
A: We will quote it within 12 hours.
2. How can I get a sample to check your quality?
A: We can send you our stock sample ,but you need pay for shipping fee.
B: We will make samples as your requir e ment after all details are confirmed.
3. What kind of files do you accept for printing?
A: PDF, AI, Core Draw, high resolution JPG.
4. Can you do the design for us?
A: Yes. We have a professional team to design and manufacture.
Pls tell us your ideas and we will carry out your ideas into perfect display.
5. How long can I expect to get the sample ?
A: samples making time is 5-7days ,and sample shipping time is usually one week.
6. What about the lead time for mass production?
A: mass production time is 30days after samples are confirmed and 30%deposit are paid.
7. How can i visit your factory?
A:Our factory is in DongGuan, GuangDong Province,China. when you are in station or airport of Guanzhou OR ShenZhen, pls give us a call and we will pick you up soon.
Selling Points:
Tag Construction-self fabric,clean finished.,cap snap at CF neck.
Neck Construction-self fabric for binding, 3/8" width.
YKK zipper-zipper applied along front opening and inseam (left side as worn)
Cuff-Self cuff, clean finished and attached to sleeve w/ 2 needle, 4 thread overedge stitching.
Ankle-Elastic applied across back ankle from inseam to outseam, 1 3/4" above foot seam. apply with chain stitching
How to measure the products? You can click here for more information: